PROMOCLEAN DISPER 22 ALU
- Removal of grease, heavy oils, burn-in residues & oxides
- Aqueous spray processes
- Compatible with most ferrous & non-ferrous alloys
PROMOCLEAN DISPER 22 ALU
PROMOCLEAN DISPER 22 ALU is especially designed for removal of greases, heavy (high viscosity) oils, burn-in organic & mineral residues and oxides. Thanks to its excellent antifoam properties it is dedicated for aqueous spray-in-air, immersed jets and tube flushing processes.
It is an upscaled version of PROMOCLEAN DISPER 22, where a pH attack retarder is added in the formulation. Because of this PROMOCLEAN DISPER 22 ALU is not only compatible with ferrous alloys but can also be used on aluminium, titanium and other light alloys. However it is recommended to test prior to use.
Show links
Hide linksThis is not a product
Although fully in line with safety & environmental regulations, this product doesn`t match our strict criteria to be labelled as a Greenway product.
LOOKING FOR A MORE SUSTAINABLE SOLUTION?
GREENWAY ALTERNATIVE
- Promoclean Disper 2
Benefits
PERFORMANCE
- Cleans efficient heavy organic & mineral pollutions
- High pH permit to remove broad spectrum of mineral & organic pollutants in large quantities
- Can be used on light alloys after prior test
COST
- High cleaning power even at low concentration
- Long bath-life
- Versatile application: can be used in production & maintenance
HSE
- Non-toxic & no CMR substances
- Non-flammable & will not cause an exothermic reaction in the cleaning tank
Process examples
Heavy oil & grease removal
Removal of burn-in residues
- A dedicated PCA Kit to monitor the bath status and compatibility report with different materials are available on request.
- It is key to determine the maximum time materials can be exposed to the cleaning chemical. Although our cleaning products will not damage materials they are designed for under normal conditions, prolonged exposure may.
Applications
OIL & GREASE REMOVAL FROM IRON PARTS
Iron parts are sensitive to corrosion and may need a temporary protection in between subsequent processes of machining the part.
OIL & GREASE REMOVAL ON ALUMINIUM AND LIGHT ALLOYS
When oil or grease need to be removed from aluminium and other light alloys, choosing the right cleaning agent is critical.
