PROMOCLEAN DISPER 6
Efficient removal of water-soluble oils
- Removing hydrocarbon & water-soluble oils on metal parts
- Detergent for spray, flush & immersed jets process
- Compatible with a wide range of metals
PROMOCLEAN DISPER 6
Is especially designed for removal of hydrocarbon- and especially water-soluble oils. Thanks to its excellent antifoam properties it is dedicated for aqueous spray, flush or immersed jets processes. Despite having a high alkaline pH to allow efficient cleaning, it doesn’t damage sensitive metals or alloys, like Inox, Brass, ferrous alloys & Titanium, Aluminium, Copper or Brass. It’s a concentrated product which is used diluted with DI water.
PROMOCLEAN DISPER 6 is qualified and used by several actors in the automotive & medical industry.
SPECIFICATIONS
| SPECIFICATIONS | VALUES | METHODS |
|---|---|---|
| Aspect | Yellow | Visual |
| Density at 20°C (g/ml) | 1,12 +/- 0,01 | BRY-MO-028 |
| pH of pure product | 13,0 +/- 0,5 | BRY-MO-011 |
| pH at 1% | 11,50 +/- 0,5 | BRY-MO-011 |
CHARACTERISTICS
| CHARACTERISTICS | VALUES |
|---|---|
| Solubility in water | Totally soluble |
| Surface tension at 1% | 34 Dynes / cm² |
Show links
Hide linksThis is a product
MAIN CONTRIBUTORS WHICH REDUCE IMPACT:
HUMAN HEALTH & SAFETY
- Non-flammable, no flashpoint & no EUH risk phrases: 100% safe for storage and when used in equipment
- Non-toxic
ENVIRONMENT PROTECTION & RESOURCES SAVINGS
- Low environmental impact: no H labelling regarding environment
- No GWP & Very low VOC (<25% of VOC compound)
- Relative low cost for waste destruction
Benefits
PERFORMANCE
- Compatibility with Inox, Ferrous alloys, Aluminum, Brass & light alloys
- Excellent solubility of water-based oils.
- Short rinsing time needed, despite being a high pH product.
COST
- High cleaning power even at low concentration
- Long bath-life
HSE
- Non-toxic & no CMR substances
- Low environmental impact
- Non-flammable
Process examples
The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advise you.
Water-based oil removal
PROMOCLEAN DISPER 6
Conc: 1.5% in DI Water
Temp: 40-50°C / 104-122°F
US: no
Time: 5–10 min
DI WATER
Temp: 20–30°C / 68–86°F
US: no
Time: 2–5 min
HOT AIR or VACUUM or DRYING SOLVENT
Time: 5–20 min
Related products & services
PCA KIT PROMOCLEAN DISPER 6
