ECOFREC TF49

High viscosity tacky flux
- Halogen free tacky flux
- Flip Chip & Rework soldering
- Low residue properties
ECOFREC TF49
Is a halogen free, no-clean high viscosity tacky flux designed for lead-free and leaded applications. After reflow, the residue is non-corrosive and don’t need to be cleaned.
FEATURES
| SPECIFICATIONS | ECOFREC TF49 |
|---|---|
| Appearance | Light yellow |
| Solubility in water | Insoluble |
| Solubility in alcohol | Soluble |
| Density at 20°C | 1.0 |
| Halogen content | No halogen |
| Viscosity (Pa.s at 20°C) (Brookfield RVT TF at 5 RPM) |
300–500 |
CHARACTERISTICS
| CHARACTERISTICS | VALUES | METHOD |
|---|---|---|
| Flux Classification | ORL0 | ANSI/J-STD-004 |
| Copper mirror | Pass | ANSI/J-STD-004 |
| Chromate paper | Pass | ANSI/J-STD-004 |
| SIR (IPC) | Pass | ANSI/J-STD-004 |
| Bono Corrosion test (85°C / 85% HR – 15 days) | Pass: Fc < 1% | Inventec: MO.SB.10029 |
This is not a product
Although fully in line with safety & environmental regulations, this product doesn`t match our strict criteria to be labelled as a Greenway product.
LOOKING FOR A MORE SUSTAINABLE SOLUTION?
GREENWAY ALTERNATIVE
- We currently don`t have a Greenway alternative but our target is to develop one in the near future. In case you want us to prioritize the development of a Greenway alternative, do not hesitate to contact us.
Benefits
PERFORMANCE
- Excellent wetting
- Great performance for Ni/Au, Sn, Ag, HAL and OSP PCB finishes
- Transparent, colorless flux residue
- High reliability through Bono-test compliance
COST
- Helps to avoid pre-mature failures of your electronic assembly
- No flux residues cleaning required
HSE
- No CMR substances
- Free of halide (Fluoride, Chloride, Bromide) and halogen
Process Recommendation
The best process will depend on factors such as operating conditions, equipment, board or component design. Check our product datasheet for info on process recommendations. In any case, our team is ready to advise and assist you in the implementation of our products.