THERMASOLV IM7
Dielectric Cooling Fluids for electronic & electric devices
- Dielectric heat transfer fluid
- Boiling point: 76°C/169°F
- Very low GWP
THERMASOLV IM7
Is a dielectric heat transfer fluid, dedicated for 1-phase or 2-phase immersion or direct cooling systems. Its high electrical insulation properties allows to immerse electronics & electrical devices under power in the fluid. The favorable characteristics of the product’s viscosity, density and surface tension allows optimal surface contact, which contributes to a superior heat transfer performance.
The very good compatibility with all metals, a wide range of plastics & elastomers and the chemical stability of the fluid, makes THERMASOLV IM7 an ideal fluid for immersion cooling.
THERMASOLV IM7 is formulated with safety in mind. It is non-toxic, has no mentioning of any EUH-phrases, is non-flammable and has no flash point. It is also a great sustainable solution as it has no ODP, very low GWP and can be offered for recycling when needed.
| SPECIFICATIONS | VALUES | METHODS |
|---|---|---|
| Aspect | Colorless, clear | Visual |
| Purity (%) | > 99 | Internal / MO.SB.10033 |
| CHARACTERISTICS | VALUES |
|---|---|
| Flash point | No |
| Boiling point | 76°C/169°F |
| Pour Point | -138°C/-216°F |
| Critical Temperature | 210°C/410°F |
| Critical Pressure (MPa) | 2,01 |
| Vapor pressure (kPa @20°C) | 16 |
| Heat of vaporization (kJ/kg @BP) | 119 |
| Liquid density (Kg/m3 @20°C) | 1430 |
| Kinematic viscosity (cSt @20°C) | 0,43 |
| Specific Heat (J/kg-K @25°C) | 1220 |
| Surface tension (dynes/cm²) | 13,6 |
| Dielectric strength (kV) | >25 |
| Dielectric Constant @1kHz | 7,3 |
| Resistivity (Ohm-cm) | 1,00E+08 |
| Thermal conductivity (W/m-K) | 0,069 |
| Water content spec (ppm) | 100 |
| Solubility water in fluid (ppm weight) | 92 |
Show links
Hide linksThis is a product
MAIN CONTRIBUTORS WHICH REDUCE IMPACT:
HUMAN HEALTH & SAFETY
- Non-flammable, no flashpoint & no EUH risk phrases: 100% safe for storage and when used in equipment
- Non-toxic, no corrosive impact & no S risk phrases
ENVIRONMENT PROTECTION & RESOURCES SAVINGS
- No environmental hazard: no H labelling regarding environment
- Can be returned for recycling and re-use: ECOPROGRAM
- Low viscosity: reduced energy use for pumps
Benefits
Performance
- Excellent thermal conductivity
- Very low surface tension
- High electrical insulation
- Low kinetic viscosity & low freezing point limit the load on pumps
Cost
- Thermally and chemically stable in use
- Can be returned for recycling and re-use
HSE
- Very low Global Warming Potential (GWP)
- No Ozon depletion potential (ODP)
- Non-flammable & no flashpoint
- Low environmental impact: GREENWAY product
Process information
Processes
The best process will depend on factors such as operating conditions & equipment. Our team is ready to advise you.
THERMASOLV IM7 is a drop-in solution for other Hydrofluoethers with a boiling point of around 76°C/169°F.
Although this product has very good compatibility properties, we cannot foresee all materials that could be exposed to the fluid. We strongly recommend testing before use.
The product can be used in the following processes:
- Immersion cooling (1-phase & 2-phase)
- Direct cooling, where the fluid flows through cold plates or tubes (1-Phase & 2 Phase)
- Specific manufacturing processes which need stable and uniform cooling
- Dielectric testing
Temperature limits
1-phase system
- Recommended minimum temperature: -105°C/-157°F
- Recommended maximum temperature: 50°C/122°F
2-phase system
- Boiling Point: 76°C/169°F
Related products & services
ECOPROGRAM
THERMASOLV IM1
THERMASOLV IM2
