THERMASOLV CF8

THERMASOLV CF6

Dielectric Cooling Fluids for electronic & electric devices

  • Dielectric heat transfer fluid
  • Boiling point: 108°C/226°F
  • Low vicosity at subzero temperatures
THERMASOLV CF8

Is a dielectric heat transfer fluid, dedicated for a broad range of electric and electronics cooling and testing applications, including immersion and direct liquid cooling, semicon chillers, critical-temperature manufacturing, dielectric testing, batteries and charging stations. The favorable viscosity, density and surface tension allow optimal surface contact, contributing to superior heat transfer performance.

THERMASOLV CF8 has a boiling point of 108 °C/226 °F and is specifically designed to offer a wider operating temperature range, with viscosity that stays low at reduced temperatures, extending application down to −40°C.

Its high electrical insulation allows electronics and electrical devices to be immersed in the fluid under power. Combined with broad compatibility across metals, plastics and elastomers and excellent chemical stability, it is well suited for immersion cooling.

THERMASOLV CF8 is formulated with safety in mind: It is non-flammable and has no precautionary, human health hazard, or environmental hazard statements. It is also a sustainable solution — no ODP, low GWP, and can be returned for recycling when needed.

SPECIFICATIONS
SPECIFICATIONS VALUES METHODS
Aspect Colorless, clear Visual
Purity (%) >99.5 Internal

CHARACTERISTICS
CHARACTERISTICS VALUES
Flash point No
Boiling point 108°C / 226°F
Pour Point -115°C / -175°F
Critical Temperature 285°C / 545°F
Critical Pressure (MPa) 4.33
Vapor pressure (kPa @20°C) 2.4
Heat of vaporization (kJ/kg @BP) under evaluation
Liquid density (kg/m³ @20°C) 1753
Kinematic viscosity (cSt @20°C) 0.88
Specific Heat (J/kg·K @25°C) 1038
Surface tension (dynes/cm²) 13
Dielectric strength (kV) >47
Dielectric Constant @1 kHz 2.2
Resistivity (Ohm·cm) >1.2E+15
Thermal conductivity (W/m·K) 0.062
Water content spec (ppm) 15
Solubility of water in fluid (ppm weight) <10

This is a product

MAIN CONTRIBUTORS WHICH REDUCE IMPACT:

HUMAN HEALTH & SAFETY

  • Non-flammable, no flashpoint & no EUH risk phrases: 100% safe for storage and when used in equipment
  • Non-toxic, no corrosive impact & no S risk phrases

ENVIRONMENT PROTECTION & RESOURCES SAVINGS

  • No environmental hazard: no H labelling regarding environment
  • Can be returned for recycling and re-use: ECOPROGRAM
  • Low viscosity: reduced energy use for pumps
Discover more about Greenway

Benefits

Performance

  • Excellent thermal conductivity
  • Very low surface tension
  • High electrical insulation
  • Low kinetic viscosity

Cost

  • Can be returned for recycling and re-use

HSE

  • Low GWP & no ODP
  • Non-flammable & no flashpoint
  • Low environmental impact: GREENWAY product

Process information

The best process will depend on factors such as operating conditions & equipment. Our team is ready to advise you. Although this product has very good compatibility properties, we cannot foresee all materials that could be exposed to the fluid. We strongly recommend testing before use.

Processes

The product can be used in the following processes:

  • Semicon chillers
  • 1-phase immersion cooling
  • 1-phase direct liquid cooling, where the fluid flows through cold plates or tubes
  • Specific manufacturing processes needing stable and uniform cooling
  • Dielectric testing
  • Tacky agent for preform-based die-attach soldering

Temperature limits

1-phase system

  • Recommended minimum temperature: -40°C/-40°F
  • Recommended maximal temperature: 100°C/230°F