QUICKSOLV FIDES

QUICKSOLV FIDES

Light Oils & Dust Remover

  • Oil & Dust removal for dielectric cleaning
  • For manual spray equipment
  • Safe & Fast cleaning under power
QUICKSOLV FIDES

Is especially designed to clean light oils & dust from electrical panels without the need to switch off the electric power. It’s very safe to use as this fluid is non-toxicity, non-flammability and thermally stable, which makes it possible to use at high and low temperature. The very good compatibility with a wide range of plastics, metals and elastomers make QUICKSOLV™ FIDES a versatile and efficient cleaning solution. The evaporation rate & low surface tension of the fluid is designed to enable fast and easy drying.

Having no GWP, it is an excellent alternative to reduces the carbon footprint of this kind of cleaning operations.

QUICKSOLV™ FIDES is a ready to use product, which does not need to be diluted.

SPECIFICATIONS
SPECIFICATIONS VALUES METHODS
Aspect Colorless, clear Visual
Purity (%) > 99,5 MO.SB.10033

CHARACTERISTICS
CHARACTERISTICS VALUES
Boiling point 49°C/120°F
Thermal conductivity (W/m-K) 0.059
Flash point No
Pour Point -108°C/-162°C
Surface tension (dynes/cm) 10.8
Density (g/cm³) 1.6
Specific Heat (kJ/kg.K) 1,103
Heat of vaporization @boiling point (kJ/kg) 88
Vapor pressure (kPa) 40
Solubility water in fluid (ppm weight) 20
Molecular weight (g/mol) 316
Critical Temperature 169°C/336°F
Critical Pressure (MPa) 1.88
Coefficient of expansion (K⁻¹) 0.0018
Kinematic viscosity (cSt) 0.4
Absolute viscosity (cP) 0.64
Dielectric Strength Range, 0.1’’ gap (kV) >60
Dielectric Constant @ 1kHz 1.8
Volume Resistivity (Ohm-cm) 1012

This is a product

MAIN CONTRIBUTORS WHICH REDUCE IMPACT:

HUMAN HEALTH & SAFETY

  • Non-flammable, no flashpoint & no EUH risk phrases: 100% safe for storage and when used in equipment
  • Non-toxic, no corrosive impact & no S risk phrases

ENVIRONMENT PROTECTION & RESOURCES SAVINGS

  • No GWP
  • Low aquatic toxicity
Discover more about Greenway

Benefits

PERFORMANCE

  • The very low surface tension allows efficient cleaning in tight spaces
  • Excellent dielectric performances
  • Thermally stable in use

COST

  • No flash point: Does not require the use of ATEX equipment
  • Reduces time of cleaning due to the fast evaporation

HSE

  • No Global Warming Potential (GWP)
  • No Ozon depletion potential (ODP)
  • Non-flammable
  • Low environmental impact: GREENWAY product

Process examples

The best process will depend on factors such as operating conditions and equipment. Our team is ready to advise you.

Cleaning of electric panels without switching off electric power

QUICKSOLV FIDES
Conc: 100%
Temp: ambient
Press: 3-4 bar with air or N2
Time: 30-60 sec
Max voltage: 40 kV
QUICKSOLV FIDES
Conc: 100%
Temp: ambient
Press: 3-4 bar with air or N2
Time: 30 sec
Max voltage: 40 kV
AIR or N2
 
 
 
Time: 15 sec