Cleaning

3M NOVEC 8200

Film cleaning fluid
Vapor phase, co-solvent, flushing & drying process
Low surface tension

IMPORTANT NOTICE: PHASE-OUT 3M™ PRODUCTS

3M™ announced in December 2022, that all Novec™ products will be phased out and not available anymore by the end of 2025. No worries, Inventec has a drop-in replacement for this product but we recommend to contact us as soon as possible in order to minimize supply interruptions.

If you want to know more about the 3M™ products phase-out, click on the this link.

OUR ALTERNATIVE(S):

PROMOSOLV DR4 -> Same formulation
PROMOSOLV NEO A1 -> Similar properties & applications + NO GWP & PFAS FREE

3M Novec 8200

3M™ Novec™ 8200 Engineered Fluid is a clear, colorless, low-odor fluid intended to replace 1,1,1-trichloroethane and perchloroethylene in film cleaning applications. This fluid has zero ozone depletion potential and low global warming potential (GWP); is not a volatile organic compound (VOC). It is low in toxicity, with a time-weighted exposure guideline of 200 ppm (eight-hour average).

Novec 8200 fluid has a higher boiling point than most CFCs, HCFCs and HFCs, reducing evaporative losses. The low surface tension and increased solvency of Novec 8200 fluid, coupled with its chemical and thermal stability, nonflammability, and excellent compatibility with film substrates, make it an ideal film cleaning solvent.

Letter from 3M – Inventec authorized distributor for EMEA area

Show links

Hide links

Product Data Sheet

MSDS finder

INFO Phase-out 3M products

Request a sample

Contact an expert

This is a product valuable for our ECOPROGRAM

Products valuable for our ECOPROGRAM can be returned to us for recycling (depending on location).

Avoid adding waste into the environment
Avoid destruction cost
Buy recycled products at a lower cost.

Discover more about ECOPROGRAM

Benefits

PERFORMANCE

Thermal and chemical stable in use (azeotropic formulation)
The very low surface tension allows deep rinsing of parts with complex geometry
Short rinsing and drying times

COST

Continuous recycling in equipment for a long bath-life
Can be returned for recycling and re-use
The relative high boiling point reduces risk of solvent drag, so limiting consumption

HSE

Very low toxicity (refer to the SDS)
No Ozon Depletion Potential (ODP) & low Global Warming Potential (GDP)
Non-flammable

Process examples

The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advise you.