THERMASOLV CF8
Dielectric Cooling Fluids for electronic & electric devices
- Dielectric heat transfer fluid
- Boiling point: 108°C/226°F
- Low vicosity at subzero temperatures
THERMASOLV CF8
Is a dielectric heat transfer fluid, dedicated for a broad range of electric and electronics cooling and testing applications, including immersion and direct liquid cooling, semicon chillers, critical-temperature manufacturing, dielectric testing, batteries and charging stations. The favorable viscosity, density and surface tension allow optimal surface contact, contributing to superior heat transfer performance.
THERMASOLV CF8 has a boiling point of 108 °C/226 °F and is specifically designed to offer a wider operating temperature range, with viscosity that stays low at reduced temperatures, extending application down to −40°C.
Its high electrical insulation allows electronics and electrical devices to be immersed in the fluid under power. Combined with broad compatibility across metals, plastics and elastomers and excellent chemical stability, it is well suited for immersion cooling.
THERMASOLV CF8 is formulated with safety in mind: It is non-flammable and has no precautionary, human health hazard, or environmental hazard statements. It is also a sustainable solution — no ODP, low GWP, and can be returned for recycling when needed.
| SPECIFICATIONS | VALUES | METHODS |
|---|---|---|
| Aspect | Colorless, clear | Visual |
| Purity (%) | >99.5 | Internal |
| CHARACTERISTICS | VALUES |
|---|---|
| Flash point | No |
| Boiling point | 108°C / 226°F |
| Pour Point | -115°C / -175°F |
| Critical Temperature | 285°C / 545°F |
| Critical Pressure (MPa) | 4.33 |
| Vapor pressure (kPa @20°C) | 2.4 |
| Heat of vaporization (kJ/kg @BP) | under evaluation |
| Liquid density (kg/m³ @20°C) | 1753 |
| Kinematic viscosity (cSt @20°C) | 0.88 |
| Specific Heat (J/kg·K @25°C) | 1038 |
| Surface tension (dynes/cm²) | 13 |
| Dielectric strength (kV) | >47 |
| Dielectric Constant @1 kHz | 2.2 |
| Resistivity (Ohm·cm) | >1.2E+15 |
| Thermal conductivity (W/m·K) | 0.062 |
| Water content spec (ppm) | 15 |
| Solubility of water in fluid (ppm weight) | <10 |
This is a product
MAIN CONTRIBUTORS WHICH REDUCE IMPACT:
HUMAN HEALTH & SAFETY
- Non-flammable, no flashpoint & no EUH risk phrases: 100% safe for storage and when used in equipment
- Non-toxic, no corrosive impact & no S risk phrases
ENVIRONMENT PROTECTION & RESOURCES SAVINGS
- No environmental hazard: no H labelling regarding environment
- Can be returned for recycling and re-use: ECOPROGRAM
- Low viscosity: reduced energy use for pumps
Benefits
Performance
- Excellent thermal conductivity
- Very low surface tension
- High electrical insulation
- Low kinetic viscosity
Cost
- Can be returned for recycling and re-use
HSE
- Low GWP & no ODP
- Non-flammable & no flashpoint
- Low environmental impact: GREENWAY product
Process information
Processes
The product can be used in the following processes:
- Semicon chillers
- 1-phase immersion cooling
- 1-phase direct liquid cooling, where the fluid flows through cold plates or tubes
- Specific manufacturing processes needing stable and uniform cooling
- Dielectric testing
- Tacky agent for preform-based die-attach soldering
Temperature limits
1-phase system
- Recommended minimum temperature: -40°C/-40°F
- Recommended maximal temperature: 100°C/230°F
