Cleaning

TOPKLEAN EL 60

TOPKLEAN EL 60

Solvent based cured flux remover and glue removal

  • Removal of flux residues
  • Solvent immersion process
  • Relative high flash-point
TOPKLEAN EL 60

Is a non-flammable, hydrocarbon-based cleaning fluid designed for the removal of solder flux residues after reflow. It is also effective for cleaning uncured adhesives, non-reflowed solder paste from stencils, and misprinted PCBs. In some cases, it can also remove certain polymerized coatings, depending on their chemical composition.

It is specially designed to use as a cold cleaner in a simple immersion tank and to offer a safe alternative for highly flammable products like IPA. For difficult to remove contaminants, the product can be heated to a maximum of 54 °C/129°F.

TOPKLEAN EL 60 is compatible with all metals and alloys, including very sensitive ones. It has also good compatibility with most plastics & elastomers, however it is necessary to test before use.

SPECIFICATIONS
SPECIFICATIONS VALUES METHODS
Aspect Transparent, slightly yellow Visual
Density (g/ml @20°C) 0.910 ± 0.010 BRY MO 028

CHARACTERISTICS
CHARACTERISTICS VALUES METHODS
Boiling point 175-195°C / 347-383°F ASTM D1078
Flash Point 64°C / 147°F ASTM D93
Miscibility in water Partially Internal
Presence of aromatic compounds (% weight) <0,01 SMS 2728
NVR (g/100 mL) <0,01 ASTM D1353
Water content (% weight) <0,1 ASTM E1364
Vapor pressure at 20°C (hPa) 0.7 No standard method
Show linksShow links Hide linksHide links
Product Data Sheet
MSDS finder
Request a sample
Contact an expert

This is a product

MAIN CONTRIBUTORS WHICH REDUCE IMPACT:

HUMAN HEALTH & SAFETY

  • Non-flammable & high flashpoint
  • Non-toxic, no corrosive impact & no S risk phrases
  • Does not contain halogenated compounds

ENVIRONMENT PROTECTION & RESOURCES SAVINGS

  • No environmental hazard (H) labeling
  • No GWP
Discover more about Greenway

Benefits

Performance

  • Excellent solubility organic & mineral residues
  • High solvency power
  • Excellent compatibility with materials used on PCB’s

Cost

  • No heating of the cleaning fluid required
  • Low investment on equipment
  • No water consumption & no need for wastewater treatment

HSE

  • Non-toxic & no CMR substances
  • No Ozon Depletion Potential (ODP)
  • No Global Warming Potential (GWP)
  • Relative high flash point – safe to use, storage & transport
  • Low environmental impact: GREENWAY product

Process examples

The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advise you.

Removal of uncured glue from stencils

TOPKLEAN EL 60