Electronic cleaning and defluxing
Electronics is one of the activities with the highest requirements for reliability.
Ensuring and maintaining a high-quality performance of parts containing all or part of printed circuits, LED is a challenge for any industrialist in this sector concerned about its good profitability. Equally important is the management and preventive and curative maintenance of production equipment.
Thus, Inventec considers the various normative requirements (IPC, ISO ...), proposes solutions adapted and respectful of regulatory texts, (Reach, RoHS ...) and takes into account the problems and the evolution of the technologies like:
- Miniaturization, stand off, sensitivity to liquids for components.
- Improve adhesion (coating, potting, underfill)
- Avoid electrochemical migration, ionic contamination
- Bonding improvement
- Compatibility with pre-charged equipment
- Microwaves technology
- No Clean technology difficult to clean
Non-exhaustive list, INVENTEC assists you in the study of the compatibility of pollutants with the product and in the process definition adapted to your need.
14 results for Electronic cleaning and defluxing
-
Promoclean™ Disper 607
PROMOCLEAN™ DISPER 607 is a water based cleaner formulated to remove all types of baked-on flux residues left on printed circuit board assemblies. Its high wetting performance permits to efficiently remove lead free soldering pastes and fluxes.
See the product sheet -
Promoclean™ Disper 610
PROMOCLEAN™ DISPER 610 is a water based alkaline cleaner formulated with a high wetting power to remove all types of baked-on flux residues left on reflow oven condensation traps and wave soldering pallets.
-
Promoclean™ Disper n° 605
Some applications require PCB cleaning after assembly, due to high feasibility exigencies of assembled components. PROMOCLEAN™ DISPER N° 605 is a mineral and organic compound designed to allow pollutants to be solubilized in the solution itself.
See the product sheet -
Promoclean™ Oven n° 4
PROMOCLEAN™OVEN N° 4 is a solvent emulsion that completely dissolves residues on reflow oven parts. Provides a perfectly clean surface after simply rinsing with water. It leaves a pleasant smell in the working area.
-
Promoclean™ TP 1128
PROMOCLEAN™ TP 1128 was specially developed to clean and remove lapping compound from ceramics and ferrous metals prior to vacuum treatment.
See the product sheet -
Promoclean™ TP 60
PROMOCLEAN™ TP 60 is used to remove fluxes and soldering residues, hardly eliminated by purely organic cleaning agents.
See the product sheet -
Promosolv™ 70ES
Promosolv™ 70ES of INVENTEC is an azeotropic formulation of the methoxynonafluorobutane (C4F9CH3), 1,2-trans-dichloroethylene and ethanol. Promosolv™ 70ES is clear, colorless and has a slight odor.
See the product sheet -
Quicksolv™ DEF 90
Applicable to many industries, QUICKSOLV™ DEF 90 is a specialty solvent developed to degrease and dry many materials at room temperature.
See the product sheet -
Topklean™ EL 20A
Cleaning and solder flux removal solvent. TOPKLEAN™ EL-20A has been specially developed for the cleaning of solder paste residues and all types of solder fluxes as well as misprinted solder pastes on PCBs.
See the product sheet -
Topklean™ EL 20D
TOPKLEAN™ EL-20D is specifically designed to remove no-clean leaded or lead-free solder pastes. Distills homogeneously and is suited to vapour phase rinsing in closed equipment (narrow distilled temperature range). Contains no surfactant and provides spotless dried surfaces; its neutral pH enables the cleaning of sensitive parts.
See the product sheet