Cleaning
With more than 40 years of experience in circuit boards cleaning, Inventec can offer global issues such as cleaning or solving agents at each step of the electronic assembly process.
20 results for Cleaning
-
Electrofor™ 132-132E
ELECTROFOR™ 132 formulation and its activated version, ELECTROFOR™ 132E, are especially used in SPRAY, for fine cleaning, without dismantling.They are non flammable cleaning agents, removing quickly dirt, oxides and other contaminants of metallic contacts.
See the product sheet -
Novec™ 71DA
Used in electronic and in various industry, NOVEC™ 71DA was specially formulated as a speciality solvent to degrease, dewax, clean, rinse and dry a wide range of materials.
See the product sheet -
Promoclean™ Disper n° 604
PROMOCLEAN™ DISPER N°. 604 was specially developed to clean solderwave frames polluted by carbonized flux residue. This product can be used : In a spraying machine, with pressures up to 15 bar,
See the product sheet -
Promoclean™ Disper n° 605
Some applications require PCB cleaning after assembly, due to high feasibility exigencies of assembled components. PROMOCLEAN™ DISPER N° 605 is a mineral and organic compound designed to allow pollutants to be solubilized in the solution itself.
See the product sheet -
Promoclean™ Oven 2
PROMOCLEAN™ OVEN N°2 is a solvent emulsion that completely dissolves residues on reflow oven parts.
See the product sheet -
Promoclean™ Oven 3
Ready to use at room temperature in an immersion cleaning tank, with or without ultrasonics. Efficient for residue removal from reflow oven parts.
See the product sheet -
Promoclean™ Oven n° 4
PROMOCLEAN™OVEN N° 4 is a solvent emulsion that completely dissolves residues on reflow oven parts. Provides a perfectly clean surface after simply rinsing with water. It leaves a pleasant smell in the working area.
See the product sheet -
Promoclean™ TP 60
PROMOCLEAN™ TP 60 is used to remove fluxes and soldering residues, hardly eliminated by purely organic cleaning agents.
See the product sheet -
Promoclean™ TP1128
PROMOCLEAN™ TP 1128 was specially developed to clean flux residues on wave frames. PROMOCLEAN™ TP 1128 is a concentrated detergent mixture of high-performance, high-alkaline liquid surfactants specially formulated for ultrasonic cleaning.
See the product sheet -
PROMOSOLV™ 41M
Used in every industrial domain, PROMOSOLV™ 41M was specifically developed as a specialty solvent for cleaning, degreasing, wax removing, rinsing, and drying for an infinite number of materials.
See the product sheet
English
Français
